Steam trap GH70
- Suitable for condensate recovery
- Horizontal installation
- Automatic venting
-
- option
- – ASTM material available
-
Fast commissioning
Discharges cold air and cold condensate automatically.
-
Suitable for steam processes with medium to high volumes
Independent adjustment of the valve opening degree to the amount of condensate to maximize the heat exchange capacity.
-
Condensate recovery
With its high back pressure tolerance, this model is suitable for condensate return.
-
Easy maintenance
This model can also be repaired built-in and is therefore quick and easy to maintain.
-
High discharge capacity
An equalizing valve with two valve openings offers a high flow capacity compared to models with only one opening.
Typical applications
Suitable for use in industrial plants, food processing plants and dyeing/cleaning equipment.
| Nominal width | Dimensions (mm) | Weight (kg) | ||||
|---|---|---|---|---|---|---|
| L | H1 | H2 | W1 | W2 | ||
| 3″ | 380 | 180 | 400 | 105 | 570 | 172 |
| 4″ | ||||||
* Available flange standards: ASME/JPI 150lb, 300lb, DIN PN40, JIS 10K, 16K, 20K
* Customized dimensions on request.
| Model | Connection | Max. Operating pressure (bar) | Max. Differential pressure (bar) | Max. Operating temperature (℃) | Venting type | Housing material | |
|---|---|---|---|---|---|---|---|
| Type | Nominal size | ||||||
| GH70-21F | Flange FF, RF* | 3″ | 21 | 21 | 400 | Bimetal | Cast steel SCPH2/WCB |
| 4″ | |||||||
* Available flange standards: ASME/JPI 150lb, 300lb, 600lb, DIN PN40, JIS 10K, 16K, 20K, 30K, 40K
● Max. permissible pressure (PMA): 40 bar
● Max. permissible temperature (TMA): 400 ℃
● Max. Back pressure during operation (PMOB): 90 % of the pressure on the inlet side
* ASTM material (WCB) on request.
● This product uses a balancing valve system with two connections. If the actual amount of condensate is significantly less than the discharge capacity of the product, there may be a steam leak.
